BM-50 Wort boiling machine BREWMASTER 50 L

The small brewhouse machine for easy preparation of 55 liters beer wort in one batch using the infusion brewing method. Practical and easy to use, our new machine BREWMASTER BM-50 permits to prepare a good hand crafted beer, using fresh products any kind of recipe. The nano brewhouse produced of stainless steel. Maximal malt quantity 13 kg.

BM-200 Wort boiling machine BREWMASTER 200 L

The small compact boiling machine for easy preparation of 200-230 liters wort in one batch using the infusion method of brewing during production of wort. Practical and easy to use, the wort-brewing machine BREWMASTER BM-200 permits to prepare a good hand crafted beer, using fresh raw-material (malt, hops, or their extracts) , just according to any kind of recipe.

BM-500 Wort boiling machine BREWMASTER 500 L

The small compact boiling machine for easy preparation of 500-550 liters wort in one batch using the infusion method of brewing during production of wort. Practical and easy to use, the wort-brewing machine BREWMASTER BM-500 permits to prepare a good hand crafted beer, using fresh raw-material (malt, hops, or their extracts) , just according to any kind of recipe.

BM-1000 Wort boiling machine BREWMASTER 1000 L

The small compact boiling machine for easy preparation of 1000 liters wort in one batch using the infusion method of brewing during production of wort. Practical and easy to use, the wort-brewing machine BREWMASTER BM-1000 permits to prepare a good hand crafted beer, using fresh raw-material (malt, hops, or their extracts) , just according to any kind of recipe.

BM-510 Additional brewing boiler for the BREWMASTER BM-500

The additional brewing boiler for use with the BREWMASTER BM-500 machine. Both devices BM-500 and BM-510 are necessary for the production of two batches of beer wort per one day. It is available for mashing process during the second brew. The BM-510 brewing boiler is fully produced of stainless steel AISI 304.

BMTM-200 Termo-sleeve for the BREWMASTER BM-200

BMTM-200 Termo-sleeve is a recommended accessory for the BREWMASTER BM-200 brewhouse. This is used for insulation of the kettle to speed up heating of the kettle and saving energy. The termo-sleeve is also very recommended for use when is requirement for more than one brew cycle per day – in this case we recommend to use the fermentation and maturation tanks with volume total of daily produced wort.

BMTM-500 Termo-sleeve for the BREWMASTER BM-500

BMTM-500 Termo-sleeve is a recommended accessory for the BREWMASTER BM-500 brewhouse and BM-510 additional brewing boiler. This is used for insulation of the kettle to speed up heating of the kettle and saving energy. The termo-sleeve is also very recommended for use when is requirement for more than one brew cycle per day. In this case we recommend to use the fermentation and maturation tanks with volume total of daily produced wort.

HBA-CS50BM – Cooling spiral for the BM-50 brewhouse

Cooling spiral is the heat exchanger for cooling of the wort before start of the fermentation process and cooling of the frementing beer inside the Cylindrical-conical nano-tanks or inside the Brewmaster BM-50 brewhouse.

HBA-BMM100 WiFi module for BREWMASTER brewhouses

HBA-BMM100 Wifi Internet mobile module is an accessory for brewhouses BREWMASTER BM-200/210, BM-500/510 and BM-1000 . Its function is easy communication with any PC, notebook or tablet with installed the remote control software. The BMM100 WiFi module is equipped for the supervision of the brewing process within the wireless local area network via wireless internet router.
keyboard_arrow_up